Hello friends of Vergt,
finally we got to program the explorer robot and the box, and record some videos. As we do not have a rescue robot, we have done a test with a mBot operated with remote control and another with a simple program where it approaches the door, stops, and backs up.
When you come […]
clearly we are going with some delay, how is our inexperience in robotics projects noticed!
We are working on the box, the explorer robot is already programmed. We will try to share a video at the end of this week.
Greetings from Aoiz
Hello my friends,
Today, we have succeeded to return the robot in the box.
The programme is ok for us. It only has to be a little adjusted
The door opens, but… closes too early ^^
Here are some pictures of the differents works around the project.
Have a good time and have a look on the tubes…
Hello. An overview of the differents working groups :
- We programmed the robot to detect the object, catch it and we tested it.
- We classify the tubes for the robot detect them.
- We […]
Hello friends of Vergt
We have been working a lot on the robot and it works well, but we had to calculate different distances and times to set the right outcome on the way back. We have also been working on the design of the box that the robot will leave the dangerous substance.
Nice to talk […]
Before frebruary holidays we have advance about many points:
-The trip of the robot. As you can see in the video, the robot manages to avoid obstacles and go in the box. (just wait before…For the moment.)
-The impression of « Sagrada familia ». We had a little problem with the 3D printer. The monument has been photocopied only […]
Hello my friends,
For our decoration we are going to print in 3D something that represents, symbolizes, you and us. For France we choose naturally the Eiffel tower.
We want to do the same for you. So we have a question :
Do you prefer that we represent your country or your province ?
Hello friends from Aioz,
We present you a video from our robot.
After have seen the second object with ultrasonic sensor, the robot makes a half turn and return back. When he detects the black mark with his line follower sensor he turns right to return to his starting point (the same with edge of the table).
This is a proposal from Aoiz’s students so that the robot does not fall off the table and does not crash.
At the moment, we are connecting robots and computer with 2.4G conexion
It can be improved, but it’s a start!